• RCC framed structure with Open Foundation designed to withstand Seismic loads as per structural design conforming to BIS.
• Walls using Solid Blocks / Bricks (Clay / Fly Ash) in cement mortar with reinforcement at Sill Level and Lintel at 7’0″ from floor level.
• Ceiling height will be maintained at 9’9” clear from finished floor level.

Flooring

•  Living, Dining, Kitchen and Bed Room Areas will be finished with 24″ x 24″ Vitrified Tiles with 4″ high skirting as per Architect’s concepts (also with optional Wooden flooring in Master Bedroom Area).
• Utility and Toilet Areas will be finished with Acid Proof Anti Skid Ceramic Tiles as per Architect’s concept.
• Balcony, Common Areas and Lift Lobby will be finished with Porcelano / Ceramic Tiles.
• Car parking will be finished with Graeno flooring and Staircase shall be finished with Kota Stone as per Architect’s design.
• Terrace Areas will be finished with Proper Weathering Course.

Kitchen :

• Counter Top Granite platform will be finished with 16 mm thick Granite slab 2’0” wide at a height 2’6” from the finished floor level along with Stainless Steel Single bowl sink with Drain Boards and 2 CP long body taps.
• Provision for Exhaust fan, Mixer, Grinder, Microwave and Refrigerator will be provided.
• Loft will be provided (Optional Modular Kitchen) as per Architect’s design on one side.
• Reticulated piped Gas Supply provision.

Elevators:

• Each block will be served by a 6 passenger lift with Variable Voltage Variable Frequency (V3F) and Automatic Rescue Device (ARD) technology.

Electrical : 

• 3 Phase underground cable from the onsite Transformer power supply and Concealed Insulated Multi strand Copper wires will be provided in all apartments with Individual Distribution Box having ELCB, MCB’s and Manual Phase change over Rotary switches.
• All Switches and Sockets will be provided in Metal Box and Modular Switches with Cover plates.
• Wiring for Invertor will be provided to support 1 Light and Fan point in each room.

•  Internal Walls will be finished with smooth finished cement plaster, Wall Care Putty coats and Premium Emulsion paint.
• Exterior walls will be finished with neat cement plaster, white cement coat and Weather Proof Exterior Emulsion paint.
• Utility / Toilet walls will be finished with Designer Glazed Ceramic Tiles of colour and size till 7’0” level as per Architect’s concept. Trims, Dadoing and Profiles in PVC will be used to protect the edges of the ceramic tiles.
• Kitchen Platform Walls will be finished with Ceramic Tiles of colour and size up to 3’0″ above the Cooking Platform.
• Ceiling surfaces will be finished with neat cement plaster, white cement coat and Asian Ace.

Joineries: 

• Entrance Main Door will be provided with Seasoned Teak Wood Frames and 30 mm thick Teak wood moulded panel flush shutter, Stainless Steel Fittings, Mortise Locks, Door Eye View.
• All Bedrooms, Toilets and Balcony Doors will be provided with Seasoned Country Wood Frames and Water Proof Hardcore Flush Doors with required fittings as per Architect’s design.
• Modular two or three panel Sliding UPVC / Country wood Window Frames and Shutters with safety MS Grills will be provided along with Mosquito Safety nets.
• Optional French Doors (UPVC / Country wood) shall be provided for Balcony Doors or Pent Houses Terrace with Safety MS Grills as per client’s requirement by Architect’s design.

Bed Rooms:

• A Loft will be provided as per Architect’s design on one side.
• Concealed Conduits for Telephone and Cable RF wiring will be provided in Master Bed Room. One Air Conditioner Electrical point will be provided in each Bedroom.

Material Specifications: